Symptom
DMC Release 3.0, 4.0, 5.0, and 6.0 documentation up to date.

Other terms
DMC, Deduction Management Component, Documentation, Installation,
Upgrade, Help, Training, SAP Service Marketplace Materials, Workflow,
Repairs

Reason and Prerequisites
DMC Release 3.0, 4.0, 5.0, and 6.0 documentation up to date.

Solution
You can find the DMC Release 4.0 4.6X, DMC Release 4.0 4.7,
DMC Release 5.0, and DMC Release 6.0 documentation on the SAP Service
Market Place. Go to www.service.sap.com, then in the section SAP
Support Portal go to the Quick Link to Software Download (alias swdc),
on the left hand side expand the folder Download, expand the folder
Installations and Upgrades, click on the link for the Search for Installations and Upgrades, enter DMC into the field for the Search
Term, and then click on the Search ****on.
On the results list select a link for SAP DMC corresponding to the
underlying SAP release in your system, then click on the link for
Documentation and download it.

You can also find the DMC Release 3.0, 4.0, 5.0, and 6.0
Documentation on SAPSERVx, where x has to be replaced by one of the following digits: 3 or 4 or 5 or 6, etc., for example: SAPSERV4.
You may use FTP program in order to download any file from any SAPSERVx
by using the paths specified below.
All files are stored as ZIP files or self-extracting ZIP files.
It is important to download them in the binary mode.

1. Product overview:
~ftp/specific/usa_ccg/dmc/documentation/DMC_Product_Overview.exe

2. Help:
~ftp/specific/usa_ccg/dmc/documentation/DMC_Help.zip

3. Training:
~ftp/specific/usa_ccg/dmc/documentation/DMC_Training.zip

4. Configuration Guide
(it also includes the information about the DMC workflow settings):
~ftp/specific/usa_ccg/dmc/documentation/DMC_Configuration_Guide.zip

5. SAP Marketplace materials:
~ftp/specific/usa_ccg/SAP_SM/SAP_SM.exe

================================================== =====================Advertisement


DMC Release 3.0:

1. Training:
~ftp/specific/usa_ccg/dmc/documentation/DMC3/training/
DMC_3_Training.exe

2. Workflow:
~ftp/specific/usa_ccg/dmc/documentation/DMC3/workflow/
DMC_3_Workflow.exe

3. Installation documentation:
1) for R/3 3.x:
~ftp/specific/usa_ccg/dmc/documentation/DMC3/R3X/
DMC_3_3x_Install.exe
2) for R/3 4.0b:
~ftp/specific/usa_ccg/dmc/documentation/DMC3/R40B/
DMC_3_40b_Install.exe
3) for R/3 4.5b:
~ftp/specific/usa_ccg/dmc/documentation/DMC3/R45B/
DMC_3_45b_Install.exe
4) for R/3 4.6x:
~ftp/specific/usa_ccg/dmc/documentation/DMC3/R46X/
DMC_3_46x_Install.exe

================================================== =====================

DMC Release 4.0:

1. General information:
~ftp/specific/usa_ccg/dmc/documentation/DMC4/general/
DMC_4_CC_General_Info.exe

2. Installation documentation

1) for DMC based on SAP release 4.0B:
~ftp/specific/usa_ccg/dmc/documentation/DMC4/R40B/
DMC_4_CC_40b_Install.exe
2) for DMC based on SAP release 4.5B:
~ftp/specific/usa_ccg/dmc/documentation/DMC4/R45B/
DMC_4_CC_45b_Install.exe
3) for DMC based on SAP release 4.6X:
~ftp/specific/usa_ccg/dmc/documentation/DMC4/R46X/
DMC_4_CC_46x_Install.exe

4) for DMC based on SAP release 4.7:
~ftp/specific/usa_ccg/dmc/documentation/DMC4/R47/
DMC_4_CC_47_Install.exe

To install the DMC Custom Component the very first time you must have
and transport the DMC Main Transport. After it is done you must use the
DMC Installation Guide to apply all necessary repairs manually in your
development system and promote them through your landscape.
Make sure to use the correct Installation Guide relevant to your DMC
and SAP Release.
================================================== =====================

DMC Release 5.0:

1. Installation documentation:

for mySAP ERP 2004 ECC500
~ftp/specific/usa_ccg/dmc/documentation/DMC5/
DMC_5_ECC500_Installation.exe

2. DMC Release 5 Solution Management Component Guide
~ftp/specific/usa_ccg/dmc/documentation/DMC5/
DMC_5_Solution_Management_Component_Guide.zip

To install the DMC Release 5.0 you must read the instructions in the
SAP note# 0802089 - DMC 500 Add-On Installation w/SAINT on mySAP
ERP ECC500 and make sure DMC specific objects are imported into your
environment using the transaction SAINT. After it is done you must use
the DMC Release 5.0 Installation Guide to apply all necessary repairs
manually in your development system and promote them through your
landscape. Make sure to use the correct Installation Guide relevant to
your DMC and SAP release.

================================================== =====================

DMC Release 6.0:

1. Installation documentation:

for mySAP ERP 2005 ECC600
~ftp/specific/usa_ccg/dmc/documentation/DMC6/
DMC_6_ECC600_Installation_Upgrade.zip

2. DMC Release 6 Solution Management Component Guide
~ftp/specific/usa_ccg/dmc/documentation/DMC6/
DMC_6_Solution_Management_Component_Guide.zip

To install the DMC Release 6.0 you must read the instructions in the
SAP note# 927611 - DMC 600 Add-On Installation/Upgrade w/SAINT on
SAP ECC600 and make sure DMC specific objects are imported into your
environment using the transaction SAINT. After it is done you must use
the DMC Release 6.0 Installation & Upgrade Guide to apply all necessary
repairs manually in your development system and promote them through
your landscape. Make sure to use the correct Installation & Upgrade
Guide relevant to your DMC and SAP release.